that depends, how is the access server connected to the router?
or do you mean via a modem connected to the router on an async line other
than the console?
I just want to clear up your methods of reaching the router now.
If the router is dead or hung, all it might need is to be power cycled. If
it is hung the console port might be dead also until a reset is performed.
Need more info.
Kevin Wigle
----- Original Message -----
From: "shella kevin"
To:
Sent: Saturday, 23 June, 2001 12:38
Subject: Console vs access server ! [7:9636]
> Hi,
> I have a remote site to logon in the router via Access server in case if
we
> are unable to logon via telnet etc. I had a router freeze and I was not
been
> able to telnet to it which is a usual practice. Then I tried via Access
> server but could not.
>
> My Q is if I go use the console port via console cable will I be able to
log
> in ? or should I assume if I am not able to logon via access server I will
> not be able to log in via console port ?
>
> Thanks
> S. Kevin
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9642&t=9636
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
