All
Has anyone encountered extremely high CPU processing (over 90%) when IP
helper
addressing has been configured over MSFCs (not dedicated routers)? On my
network, this command produced very bad performance problems. However, I must
stress that the command was used for broadcasting (xxx.xxx.xxx.255) and also
specified for single hosts.
Cisco documentation says this is possible on routers and although specified
protocols are forwarded, the performance was extremely poor on MSFC. IOS is
12.1(7a)
If you have had this problem, how did you rectify it (apart from removing the
command)?
Many thanx
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9736&t=9736
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
