you also need to configure "no ip address" under the BRI interface. "Brian Dennis" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Try using "dialer pool 1" under the dialer interface and "dialer pool-member > 1" under the BRI interface(s). > > Brian Dennis, CCIE #2210 (R&S)(ISP/Dial) CCSI #98640 > 5G Networks, Inc. > [EMAIL PROTECTED] > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > > hwen > > Sent: Saturday, June 23, 2001 8:50 PM > > To: [EMAIL PROTECTED] > > Subject: I can't use dialer 1 int to connect internet [7:9662] > > > > > > Hi, > > when I only config the bri int , I can ping any ip in route. > > Now, I use the dialer 1 int, I can't ping any ip in route > > > > my config > > > > version 12.0 > > service timestamps debug uptime > > service timestamps log uptime > > no service password-encryption > > ! > > hostname 2600 > > ! > > ! > > ! > > ! > > ! > > ! > > ip subnet-zero > > no ip domain-lookup > > ! > > isdn switch-type basic-net3 > > isdn voice-call-failure 0 > > ! > > ! > > ! > > interface FastEthernet0/0 > > ip address 192.168.1.250 255.255.255.0 > > no ip directed-broadcast > > ip nat inside > > duplex auto > > speed auto > > ! > > interface BRI1/0 > > ip address negotiated > > no ip directed-broadcast > > ip nat outside > > encapsulation ppp > > dialer rotary-group 1 > > dialer-group 1 > > isdn switch-type basic-net3 > > ! > > interface BRI1/1 > > no ip address > > no ip directed-broadcast > > ip nat outside > > encapsulation ppp > > shutdown > > dialer rotary-group 1 > > isdn switch-type basic-net3 > > ! > > interface BRI1/2 > > no ip address > > no ip directed-broadcast > > shutdown > > isdn switch-type basic-net3 > > ! > > interface BRI1/3 > > no ip address > > no ip directed-broadcast > > shutdown > > isdn switch-type basic-net3 > > ! > > interface Dialer1 > > ip address negotiated > > no ip directed-broadcast > > ip nat outside > > encapsulation ppp > > dialer in-band > > dialer idle-timeout 1800 > > dialer string 169 > > dialer load-threshold 1 either > > dialer-group 1 > > ppp authentication pap callin > > ppp pap sent-username 169 password 7 055A5056 > > ppp multilink > > ! > > ip classless > > ip route 0.0.0.0 0.0.0.0 Dialer1 > > no ip http server > > ! > > dialer-list 1 protocol ip permit > > ! > > line con 0 > > transport input none > > line aux 0 > > line vty 0 4 > > login > > ! > > no scheduler allocate > > end > > > > > > when I ping somewhere in route , the message is > > > > Sending 5, 100-byte ICMP Echos to 166.111.8.28, timeout is 2 seconds: > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9752&t=9662 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
