can't use an ethernet patch cord. need a rollover cable - pins 1 and 8 reversed. look here: http://www.cisco.com/univercd/cc/td/doc/product/iaabu/distrdir/dd2501/pin.ht m watch the wrap for the Cisco cable pinouts ( note there is a type on the pinout chart ) HTH Chuck -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Ajay Pandey Sent: Monday, June 25, 2001 7:39 PM To: [EMAIL PROTECTED] Subject: Need help in hooking up the console port to a computer on a [7:9901] Hi, I just bought a used Cisco 2520 router and as per instructions, I connect the console port using the RJ-45 cable to a DB9 (I also tried connecting it to a DB25) and connected it into my computer running Win Me. I setup the hyperterminal according to the setting, Baud rate etc., given on the online documentation and it said it is connected. But there was no CLI of the router, also it remained connected even if I powered off the router. Please help me in troubleshooting this as I am new to Cisco hardware. Thanks a lot. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9906&t=9906 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]