I am using a roll-over cable.. ""Ajay Pandey"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi, > I just bought a used Cisco 2520 router and as per instructions, I connect > the console port using the RJ-45 cable to a DB9 (I also tried connecting it > to a DB25) and connected it into my computer running Win Me. I setup the > hyperterminal according to the setting, Baud rate etc., given on the online > documentation and it said it is connected. > But there was no CLI of the router, also it remained connected even if I > powered off the router. > > Please help me in troubleshooting this as I am new to Cisco hardware. > > Thanks a lot. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9915&t=9915 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
