The key-combination I meant to post is "ctrl+r". The IOS version I'm using
right now is 12.0(14), and it works on it. I use it all the time.

CM 

> -----Original Message-----
> From: Raees Ahmed Shaikh [mailto:[EMAIL PROTECTED]]
> Sent: 26 June 2001 07:16
> To: 'Charles Manafa'
> Subject: RE: Console command [7:9805]
> 
> 
> Thanks for your support, however I tried this command in two 
> of my routers
> using versions 11.3 and 12.0 respectively but it didnt work, 
> can you tell me
> in which version is this command supported.
> 
> Thanks.
> 
> -----Original Message-----
> From: Charles Manafa [mailto:[EMAIL PROTECTED]]
> Sent: Mon, June 25, 2001 8:57 PM
> To: [EMAIL PROTECTED]
> Subject: RE: Console command [7:9805]
> 
> 
> will also refresh the command line.
> 
> CM 
> 
> -----Original Message-----
> From: Richard Chang
> To: [EMAIL PROTECTED]
> Sent: 25/06/01 18:39
> Subject: Re: Console command [7:9805]
> 
> Try "logging synchronous"
> To synchronize unsolicited messages and debug output with solicited
> Cisco
> IOS software output and prompts for a specific console port line,
> auxiliary
> port line, or virtual terminal line, use the logging synchronous line
> configuration command. Use the no form of this command to disable
> synchronization of unsolicited messages and debug output.
> 
> logging synchronous [level severity-level | all] [limit
> number-of-buffers]
> 
> no logging synchronous [level severity-level | all] [limit
> number-of-buffers]
> 
> Richard
> 
> 
> ""Raees Ahmed Shaikh""  wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Dear All,
> >
> >   Pls suggest the command to break into the console, once it is
> showing
> lot
> > of debugging output on the console, and we want to log into 
> the router
> for
> > checking the util etc.  Can we interrupt the logging on the 
> console to
> give
> > preference to keyboard commands view and not to the console message,
> >
> > I tried no console logging, but it stops all the messages, I want to
> view
> > the console message but want to type some commands as well I need
> preference
> > when I am typing something on the console.
> >
> > Any help appreciated
> >
> > Thanks in advance,
> >
> > Raees




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9942&t=9805
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to