Wouldn't a 'show ver' also work? Look for section about flash being read-only or read/write. The 1600 ran from flash like 2500 so I would think it would say read-only whereas the R series runs from RAM. --- Sam Deckert wrote: > Check the image name from the sh ver - if it > contains an 'm' it means run > from memory I think. > > Here are the examples someone else used - you can > see it from these: > > IOS for 1600: > > c1600-y-l.113-11b.bin > > > IOS for 1600R: > > c1600-y-mz.120-9.bin > > > HTH, > > Sam. > > ----- Original Message ----- > From: "Raul F. Fernandez-WCOMM" > To: > Sent: Tuesday, June 26, 2001 1:38 AM > Subject: How to tell the difference beteween a 1600 > and a 1600R series. > [7:9797] > > > > Dear Folks, > > > > Hope all is going well for everyone. I have a real > quick question. From > the > > "show ver" is there a way to determine the > difference between a 1600 and > > 1600R series routers. Also will a 1600R run > regualr 1600 code? Thank you. > > > > Sincerely, > > > > Raul [EMAIL PROTECTED] __________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9950&t=9950 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]