m means run from memory. z means it is compressed. That was what I found out from Cisco site sometime back. cheekin ----- Original Message ----- From: "Neil Schneider" To: Sent: Tuesday, June 26, 2001 20:32 Subject: Re: How to tell the difference beteween a 1600 and a 1600R [7:9956] > I am pretty sure the M means it is a compressed IOS. > > Neil > > > ""Sam Deckert"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Check the image name from the sh ver - if it contains an 'm' it means run > > from memory I think. > > > > Here are the examples someone else used - you can see it from these: > > > > IOS for 1600: > > > > c1600-y-l.113-11b.bin > > > > > > IOS for 1600R: > > > > c1600-y-mz.120-9.bin > > > > > > HTH, > > > > Sam. > > > > ----- Original Message ----- > > From: "Raul F. Fernandez-WCOMM" > > To: > > Sent: Tuesday, June 26, 2001 1:38 AM > > Subject: How to tell the difference beteween a 1600 and a 1600R series. > > [7:9797] > > > > > > > Dear Folks, > > > > > > Hope all is going well for everyone. I have a real quick question. From > > the > > > "show ver" is there a way to determine the difference between a 1600 and > > > 1600R series routers. Also will a 1600R run regualr 1600 code? Thank > you. > > > > > > Sincerely, > > > > > > Raul Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=10055&t=10055 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]