Sorry- Conf t, then Interface Fa..., & then the Span Port command.
Phil
----- Original Message -----
From: "Subba Rao"
To: "Circusnuts"
Cc: "Cisco"
Sent: Wednesday, June 27, 2001 11:47 AM
Subject: Re: Spanning on 2900XL switch [7:10107]
> On 0, Circusnuts wrote:
> > I remember there being some differences between the 12.0 Enterprise 2900
&
> > the 11.x's (I know the password break is different), but I think the
command
> > is still the same #Port Monitor
> >
> > The IOS term is used on the "IOS" based switches (1900/2900/3500) & the
OS
> > term is used on the "Set" based switches
(2901/2980/5000/5500/6500/8500).
> >
>
> I have "set" and "port" from the in the "enable" and "conf t" modes. It
looks
> like these commands don't exist in these modes.
>
> The PDF pages at Cisco are confusing too.
> --
>
> Subba Rao
> [EMAIL PROTECTED]
> http://members.home.net/subba9/
>
> GPG public key ID 27FC9217
> Key fingerprint = 2B4C 498E 1860 5A2B 6570 5852 7527 882A 27FC 9217
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10114&t=10107
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
