Note clock internal on one end. This uses older commands. Appletalk also
running on this. Secondary ip address used to link discontiguous network.
You can use one map-list for the entire interface or you can create separate
map-lists for each subinterface. The latter is easier to troubleshoot.

7507 router config:
interface ATM6/0
 description Location Business_North. Always node 4. 
 no ip address
 atm clock INTERNAL
!
interface ATM6/0.1 multipoint
 description pvc to Data Center via XYZ fiber
 ip address aaa.bbb.7.250 255.255.255.252 secondary
 ip address 10.18.35.4 255.255.255.0
 atm pvc 1 0 35 aal5snap
 map-group TGN
 appletalk cable-range 35-35 35.4
 appletalk zone ATM
!         
map-list TGN
 ip 10.18.35.1 atm-vc 1 broadcast
 appletalk 35.1 atm-vc 1 broadcast
 ip aaa.bbb.7.249 atm-vc 1 broadcast

7513 router config:
interface ATM12/0
 description Location Business_East. Always node 1. 
 no ip address
!
interface ATM12/0.1 multipoint
 description pvc to Business_North via XYZ fiber.
 ip address aaa.bbb.7.249 255.255.255.252 secondary
 ip address 10.18.35.1 255.255.255.0
 atm pvc 1 0 35 aal5snap
 map-group TGE
 appletalk cable-range 35-35 35.1
 appletalk zone ATM
!
map-list TGE
 ip 10.18.35.4 atm-vc 1 broadcast
 appletalk 35.4 atm-vc 1 broadcast
 ip aaa.bbb.7.250 atm-vc 1 broadcast


> -----Original Message-----
> From: Sivaramakrishna Iyer Krishnan
> [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, June 27, 2001 3:29 PM
> To: [EMAIL PROTECTED]
> Subject: configuring ATM's for CISCO 7505 !!! [7:10151]
> 
> 
> Hi,
> 
> Does anybody have a working configuration for connecting two ATM on
> CISCO 7505 connected to each other by point -to-point OC3 cable ????..
> 
> topology :-
> 
> R1 (atm) ----- (atm) R2
> 
> thanks,
> krishnan.
> Report misconduct 
> and Nondisclosure violations to [EMAIL PROTECTED]




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10178&t=10151
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to