If I read it correctly, it seems the command 'dialer load-threshold 1' will
not bring up addtional link anymore :-
Quote
When Multilink PPP is configured and you want a multilink bundle to be
connected indefinitely, use the dialer idle-timeout command to set a very
high idle timer. (The dialer load-threshold 1 command no longer keeps a
multilink bundle of n links connected indefinitely and the dialer
load-threshold 2 command no longer keeps a multilink bundle of two links
connected indefinitely.)
Unquote
http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113ed_cr/d
ial_c/dcprt2/dcppp.htm
"Sam Deckert" wrote in message ...
>Here is the debug isdn events output from when the 1700 disconnects:
>
>clarendon2-gw#
>04:14:10: ISDN BR0: Event: Hangup call to call id 0x801E
>04:14:10: ISDN BR0: process_disconnect(): call id 0x801E, call type is
DATA,
>b_idb 0x809D7DF8, ces 1, cause Normal call clearing(0x10)
>04:14:10: %ISDN-6-DISCONNECT: Interface BRI0:2 disconnected from
0353324231
>clarendon, call lasted 20 seconds
>04:14:49400989532: ISDN BR0: received HOST_DISCONNECT_ACK call_id 0x801E
>04:14:47244640256: ISDN BR0: HOST_DISCONNECT_ACK: call type is DATA
>04:14:47244640267: %LINK-3-UPDOWN: Interface BRI0:2, changed state to down
>04:14:49398792589: ISDN BR0: received HOST_DISCONNECT_ACK call_id 0x801E
>04:14:47244640256: ISDN BR0: HOST_DISCONNECT_ACK: call type is DATA
>
>
>Here is the debug isdn events output from the 2611 side of things:
>05:12:32225367844: ISDN BR0/1: received HOST_DISCONNECT call_id 0x25
>05:12:30064771072: ISDN BR0/1: Event: Call to was hung up.
>05:12:32225367716: ISDN BR0/1: process_disc_ack(): call id 0x25, ces 1,
call
>type DATA
>05:12:30906921739: %ISDN-6-DISCONNECT: Interface BRI0/1:2 disconnected
from
>unknown , call lasted 20 seconds
>05:12:32222871552: %LINK-3-UPDOWN: Interface BRI0/1:2, changed state to
down
>05:12:32222862421: ISDN BR0/1: received HOST_DISCONNECT_ACK call_id 0x25
>05:12:30064771072: ISDN BR0/1: HOST_DISCONNECT_ACK: call type is DATA
>
>I am still working on it! Thought it might be the fast-idle timer, so made
>it
>a large value, to no avail.
>
>Thanks again if anyone can help!
>
>Sam.
>
>
>----- Original Message -----
>From: Sam Deckert
>To: [EMAIL PROTECTED]
>Sent: Monday, July 02, 2001 3:09 PM
>Subject: ISDN B Channel Disconnecting
>
>
>Hello everyone,
>
>I am having a bit of an ISDN related problem at the moment and was
wondering
>if anyone is able to help.
>
>I am connecting two sites together via 128k isdn, with one site having a
2611
>and the other a 1700.
>
>I have the two sites permanently connected fine with the first B channel,
>however whenever I issue the "dialer load-threshold 1 either" command one
>each
>router to always have the 2nd B channel up, the second B channel connects
and
>remains connected for 20 seconds exactly before disconnecting. The 1st B
>channel remains connected regardless.
>
>I have tried changing the idle-timeout values to no avail, and just cant
>figure it out.
>
>I guess it is probably something simple, but just cant work it out.
>
>Here is the BRI config of the 2611:
>
>username clarendon2-gw password 7 094E1B040D0210
>!
>hostname clarendon
>ip subnet-zero
>no ip finger
>!
>ipx routing 0030.854f.c9e0
>ipx gns-response-delay 1500
>isdn switch-type basic-net3
>!
>!
>interface BRI0/1
> ip unnumbered BRI0/0
> encapsulation ppp
> no ip mroute-cache
> dialer idle-timeout 2000000
> dialer enable-timeout 5
> dialer wait-for-carrier-time 15
> dialer map ip xxx.xxx.xxx.xxx name clarendon2-gw broadcast
> dialer map ipx FEEDBEEF.0002.1761.29dd name clarendon2-gw broadcast
> dialer load-threshold 1 either
> dialer-group 1
> ipx network FEEDBEEF
> no ipx route-cache
> ipx watchdog-spoof
> isdn switch-type basic-net3
> isdn calling-number xxxxxxxx
> no fair-queue
> compress stac
> no cdp enable
> ppp authentication chap
> ppp multilink
>!
>dialer-list 1 protocol ip permit
>dialer-list 1 protocol ipx permit
>no cdp run
>
>
>Here is the config of the 1700:
>
>hostname clarendon2-gw
>!
>username clarendon password 7 011153094F0C01
>!
>!
>ipx routing 0002.1761.29dd
>ipx gns-response-delay 1500
>isdn switch-type basic-net3
>!
>interface BRI0
> ip unnumbered FastEthernet0
> encapsulation ppp
> dialer idle-timeout 2000000
> dialer map ip xxx.xxx.xxx.xxx name clarendon broadcast
> dialer load-threshold 1 either
> dialer-group 1
> ipx network FEEDBEEF
> no ipx route-cache
> ipx watchdog-spoof
> isdn switch-type basic-net3
> no fair-queue
> compress stac
> no cdp enable
> ppp authentication chap
> ppp multilink
>!
>ip classless
>no ip http server
>!
>dialer-list 1 protocol ip permit
>dialer-list 1 protocol ipx permit
>no cdp run
>!
>no scheduler allocate
>end
>
>
>What do you think??? Any advice, suggestions welcome and most appreciated!
>
>Thanks...
>
>Sam.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10647&t=10596
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
