Post the conf of your router and cat to have more visibility. Claude-Vincent Perez CCIE# 7419, CCNP, CCDP --- cisco guru wrote: > Hi, > I am still not able to get inter-vlan routing b/w 2 > pc's connected to a Cat > 5 switch and a 2620 router. > Basically, I have 2 pc's connected to a Cat 5000, > ip's, 30.1.1.30. def. > gwy. 30.1.1.100 and 40.1.1.10 and def. gwy. > 40.1.1.100 > The sc0 on the swich is 30.1.1.50 and def. gwy. > 30.1.1.100 > On the 2620, I have 2 subif's, f0/0.1 at 30.1.1.100 > and f0/0.40 at > 40.1.1.100 and isl encap enabled. > Port 2/11 on the Cat 5 has trunking enabled for the > 2620. > Ping works from pc1 (30.1.1.30). Can ping the Cat 5 > and the 2620 router.( I > assumed since the pc and the switch were in Vlan 1 > by default, it worked). > Ditto from the Cat5 itself and the router back to > the pc. > BUT cannot ping 40.1.1.100 from the 2nd pc and > vice-versa from the router. > Reloaded the router to see if it works. No luck. > What is it I am missing on the switch to get this > working?? > Any help/advise would be gratefully accepted. > Sincerely. > > > _________________________________________________________________ > Get your FREE download of MSN Explorer at > http://explorer.msn.com [EMAIL PROTECTED] ===== Claude-Vincent Perez CCIE# 7419, CCDP, CCNP __________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=10950&t=10950 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
