not enough information Tim. (I find myself sitting here, wishing I were clairvoyent)... post your show version and maybe a show memory (we'll start with the first 4 lines of that), and the config that's crashing your router would be nice, too. I think I worked Lab-2 with a that same router running a compressed image and it was fine... -e- ----- Original Message ----- From: Tim Ross To: Sent: Thursday, July 05, 2001 12:48 AM Subject: O.T. BGP Problems in home lab [7:11041] > I keep having BGP problems in my home lab. I have mostly 2500's in my home > lab and recently even upgraded to 16DRAM and 16 Flash thinking that would > solve the problem. Most recently I was doing CCBootCamp's Lab-2 and a router > with 16/16 has the error below, then rebooted itself. It will reboot, run a > few minutes, then reboot again. This is on the router that is redistributing > OSPF BGP. I keep have problems when running BGP on various routers and > them rebooting. I am not running "debug" or any other processor intensive > utilities. Any work-arounds or certain IOS versions to avoid? > > SCHED: Stack for process BGP Router running low, 4/3000 > r6# > > Thanks, > Tim Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=11044&t=11041 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
