First question - what are the actual symptoms? Are you just concerned
about layer 2 showing TEI_ASSIGNED?
What happens when you try to dial?
When you say "the debug(q921 & q931) messages I'm receiving arent showing
me anything relevant", what ARE they showing you? Anything at all?
I have come across cases with basic-net3 BRIs where layer 2 doesn't show
multiple_frame_established, but tei_assigned. However when a call is
received or made, it works quite happily. I've never investigated the
background of why this is so.
If this is not the problem, and debug isdn q921 shows no chat between the
router and the switch, and no lights are on and nobody's home, and you've
checked with the telco that the switch-type is correct; well, ISDN services
have been known to fail before. Ask your telco if it's actually working at
their end :-)
Your dialer string of '053' looks seriously dodgy, by the way. Is this a
sanitised version, or what are you trying to achieve with that?
JMcL
---------------------- Forwarded by Jenny Mcleod/NSO/CSDA on 06/07/2001
08:59 am ---------------------------
"Phil Barker" @groupstudy.com on 05/07/2001
09:51:21 pm
Please respond to "Phil Barker"
Sent by: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
cc:
Subject: RE: My BRI interface will not respond! [7:11045]
Can you post a copy of 'sh isdn status' for the bri ?
Phil.
--- Charles Manafa
wrote: > You can't ignore the "dialer map" statement,
you
> need it for legacy DDR.
> That's what binds the remote IP address to a phone
> number.
>
> CM
>
> -----Original Message-----
> From: Uche Ishionwu
> To: [EMAIL PROTECTED]
> Sent: 05/07/01 11:53
> Subject: My BRI interface will not respond!
> [7:11045]
>
> Who can help me? I am trying to get cisco2620
> modular router to route
> out
> of it's bri interface. can anyone help? below you
> will find a copy of th
> current configuration....the only significant
> interface to look out for
> here
> is Bri1/0 ...This is the interface i am testing with
> at the moment. You
> can
> just ignore the Dialer map / dialer interface
> configurations for now. I
> just
> want to see the interface showing some sign of
> life....at the moment the
> lights wont even flicker, even though the debug(q921
> & q931) messages
> I'm
> receiving arent showing me anything relevant.
> I would really appreciate any form of help. Cheers
> Pash!
>
> Config---------------------------->
>
>
> oks>en
> Password:
> oks#sh conf
> Using 1443 out of 29688 bytes
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname oks
> !
> no logging console
> no logging monitor
> enable secret 5 $1$DjGs$cxj/.CpMxoel/kKvi.Wqn1
> !
> !
> !
> !
> !
> memory-size iomem 15
> ip subnet-zero
> !
> isdn switch-type basic-net3
> isdn voice-call-failure 0
> !
> !
> !
> interface FastEthernet0/0
> ip address 192.168.0.2 255.255.255.0
> no ip directed-broadcast
> duplex auto
> speed auto
> !
> interface BRI0/0
> no ip address
> no ip directed-broadcast
> shutdown
> isdn switch-type basic-net3
> !
> interface BRI1/0
> ip address 192.168.8.2 255.255.255.0
> no ip directed-broadcast
> encapsulation ppp
> dialer string 053
> dialer string 02710750
> dialer-group 1
> isdn switch-type basic-net3
> !
> interface BRI1/1
> no ip address
> no ip directed-broadcast
> shutdown
> isdn switch-type basic-net3
> !
> interface BRI1/2
> no ip address
> no ip directed-broadcast
> shutdown
> isdn switch-type basic-net3
> !
> interface BRI1/3
> no ip address
> no ip directed-broadcast
> shutdown
> isdn switch-type basic-net3
> !
> interface Dialer0
> no ip address
> no ip directed-broadcast
> dialer in-band
> no cdp enable
> !
> ip classless
> ip route 192.168.0.0 255.255.255.0 FastEthernet0/0
> ip route 192.168.8.0 255.255.255.0 BRI1/0
> no ip http server
> !
> !
> map-class dialer xxxxxxxx
> !
> map-class dialer oks_cisco1
> dialer isdn speed 56
> dialer-list 1 protocol ip permit
> !
> line con 0
> password ucheoma
> transport input none
> line aux 0
> line vty 0 4
> login
> !
> end
[EMAIL PROTECTED]
____________________________________________________________
Do You Yahoo!?
Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk
or your free @yahoo.ie address at http://mail.yahoo.ie
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11132&t=11045
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
