Thanks Karen, Delayed response - I've been away all week. Gaz ""Karen E Young"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I did some research on this about a year ago for a project at work. > > As of version 5.4(3) of the catalyst OS code, local Usernames and Passwords > were not supported. Sorry guys, you can't do it. > > HTH, > Karen > > *********** REPLY SEPARATOR *********** > > On 6/30/2001 at 4:56 AM Gareth Hinton wrote: > > >I asked a similar question a few days ago referring to the Cat4000 (set > >based). No one came back with a suitable answer, but it was hidden within a > >load of other questions so maybe everyone had fallen asleep by that point. > >You probably already know you can use TACACS/Radius if they're available. > >I haven't been able to find a way to set different local user names and > >passwords yet. > > > >My question was with refernce to the Ciscoview package on the Cat4000's > >(also on the 5000's) which asks for username and password, but username has > >to be left blank at the moment. > > > >Anybody got any ideas. > > > >I'll go off and have another dig on CCO > > > >Thanks, > > > >Gaz > > > >""tazman"" wrote in message > >[EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > >> Is there a way to setup individual usernames/passwords on a set based > >> switch. I know the commands to setup the username/password on a IOS based > >> box but is there a option to perform the same thing a a set based box like > >> the Catalyst 5000/5500??? Any help is greatly appreciated. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=11205&t=11205 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]