I am taking a practice test and one of the questions had to do with token
ring
number. Is the "srn" tell you what the ring number is? Is that mean source
ring number? I thought the answer would be 1. But that isn't an option?
here is the question
This token ring interface is physically connected to what token-ring number?
A. 2
B. 10
C. 100
D. 0x01
E. 0x0000f8
Router#show interface tokenring 0
1.) Tokenring 0 is up, line protocol is up
2.) Hardware is Dual token ring, address is 0000.3080.5fca
(bia
0000.3080.5fca)
3.) Interface address is 1.0.0.7, subnet mask is 255.0.0.0
4.) NTU 8136 bytes, BW 4000 kbit, DLY 630 usec, rely 255/255,
load 1/255*/
5.) Encapsulation SNAP, loopback not set, keepalive set (10
sec)
6.) ARP type: SNAP, ARP Timeout 4:00:00
7.) ARP type: 16 Mbps
8.) Single ring node, Source Route Transparent Bridge cable
9.) Source bridging enabled, srn 1 bn 2 trn 100 (ring group)
10.) Proxy explorers disbaled, spanning explorer enabled, NetBIOS
cache disabled
11.) Group address: 0x00000000, Financial address: 0x0000011A
12.) Ethernet transit OUT: 0x0000F8
13.) last input 0:00:00, output 0:00:00, output hang never
14.) last clearing of "show interface" counters never
15.) output queue 0/40, 0 drops; input queue 1/75, 0 drops
16.) five minute input rate 19000 bits/sec, 32 packets/sec
17.) five minute output rate 0 bits/sec, 0 packets/sec
18.) 420 packets input, 264 bytes, 0 no buffer
19.) received 75020 broadcasts, 0 runs, 0 giants
20.) 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
21.) 272 packets output, 171 bytes, 0 underruns
22.) 0 output errors, 0 colloisions, 1 interface resets, 0
restarts
23.) 4 transitions
Router#)
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11476&t=11476
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
