Don't let the subject mislead you in my intention but here is my situation
if anyone would like to take a look.
I've got multiple locations connected via frame coming into a 2610 @
10.1.1.5:
10.2.0.0
10.3.0.0
10.4.0.0
10.5.0.0
10.6.0.0
10.7.0.0
The 2610's default route is to 10.1.1.1 which is obviously on the 10.1.0.0
segment in the HQ through a pix to the internet. The clients at HQ, whos
gateway is 10.1.1.1 need to occasionally access the spokes so I added static
routes in the Pix for each of the spokes. I am a firm beleiver in Cisco's
products being a specific task oriented device (ie. pix>firewall, 3015 >
VPN) and not to be used for anything different. I know the PIX is not
designed to be a router but in this case I need get some input from others
as to why the PIX is not bouncing requests for the spokes out the 2610 like
a quote unquote "regular router" would.
What happens is the PIX can ping to say for example the 10.1.1.17 which is a
Domain Controller in that site. But if I ping from a client or the DC in HQ
no luck. This is with the gateway of 10.1.1.1 assigned to the DC and or
client. Also, when I do a show ip route I see only the outside and the
inside IP addresses.
Here is the config minus the Public's IP's and security info. The only NAT
pool is through a PAT and an access list is applied on the outside interface
to filter inbound traffic. Maybe I had a brainfart on something
suggestions are appreciated:
0300-PIX-01# sh conf
: Saved
:
PIX Version 6.0(1)
nameif ethernet0 outside security0
nameif ethernet1 inside security100
<>
hostname 0300-PIX-01
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 1720
fixup protocol rsh 514
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol skinny 2000
names
access-list 100 <>
pager lines 24
logging on
interface ethernet0 auto
interface ethernet1 auto
mtu outside 1500
mtu inside 1500
ip address outside <>
ip address inside 10.1.1.1 255.255.0.0
ip audit info action alarm
ip audit attack action alarm
pdm history enable
arp timeout 14400
global (outside) 1 <>
nat (inside) 1 10.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp <> <>
static (inside,outside) tcp <> <>
<>
<>
access-group 100 in interface outside
route outside 0.0.0.0 0.0.0.0 <> 1
route inside 10.2.0.0 255.255.0.0 10.1.1.5 1
route inside 10.3.0.0 255.255.0.0 10.1.1.5 1
route inside 10.4.0.0 255.255.0.0 10.1.1.5 1
route inside 10.5.0.0 255.255.0.0 10.1.1.5 1
route inside 10.6.0.0 255.255.0.0 10.1.1.5 1
route inside 10.7.0.0 255.255.0.0 10.1.1.5 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323
0:05:00 si
p 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
no sysopt route dnat
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh timeout 5
terminal width 80
<>
0300-PIX-01#
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11860&t=11860
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
