I may be misunderstanding your topology...it would help if you posted config
excerpts.
As far as my experience has been, secondary addresses are configured in
eigrp in the same way as primary addresses. Just make sure you've included
the "router eigrp [network#]" and "network xx.xx.xx.xx" commands on the
relevant router. Both routers need to be using eigrp and having the same
autonomous system number in order to see each others updates (unless you are
redistributing routes, but I won't get into that).
Post your config and the group will be better able to see what's up, ok?
-Mark A. Morenz, MS Ed, CCNA, CCAI
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12113&t=12087
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
