Look up the pinout of each rj45 I think it's a roll cable, but you need to
connect TX to RX and Visa Versa. Make sure you set up clocking one external
and one internal
-----Original Message-----
From: anthony moore [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 12, 2001 8:13 AM
To: [EMAIL PROTECTED]
Subject: connecting T1 modules [7:12139]
Anyone know what kind of cable to use to connect two T1 modules? I have a
2525 with the Fractional/full T1 module(RJ45) and a 2621 with the
WIC-1DSU-T1 module(RJ45). What kind of cable can I use to connect these
momdules?
Thanks
Privileged/Confidential Information may be contained in this message or
attachments hereto. Please advise immediately if you or your employer do
not consent to Internet email for messages of this kind. Opinions,
conclusions and other information in this message that do not relate to the
official business of this company shall be understood as neither given nor
endorsed by it.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12155&t=12139
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
