When I trace from a cisco router to another Cisco router I get a timeout
failure every other probe on the last hop It fails on every type of
cisco router I have tried, 7513,25xx abd 36xx. I think that it must be
normal but I cannot find anything in the archives here or at the Cisco
site that says it is normal? See following where I do a trace between
two routers on connected interfaces.
* 4 msec * 4 msec * 8 msec * 8 msec
r1#trace
Protocol [ip]:
Target IP address: 192.168.10.1
Source address: 192.168.10.1
% Invalid source address
r1#trace
Protocol [ip]:
Target IP address: 192.168.10.1
Source address: 192.168.10.2
Numeric display [n]:
Timeout in seconds [3]:
Probe count [3]: 15
Minimum Time to Live [1]:
Maximum Time to Live [30]:
Port Number [33434]:
Loose, Strict, Record, Timestamp, Verbose[none]:
Type escape sequence to abort.
Tracing the route to 192.168.10.1
1 192.168.10.1 4 msec 4 msec * 8 msec * 4 msec * 4 msec * 4 msec
* 8 msec
* 4 msec *
r1#
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12191&t=12191
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
