Hey all I am having a wierd quirk and thought maybe you all may help me find
an answer.
Thanks in advance for any help:
We've just set up a docsis environment with a CMTS including a UBR7200,
CNR (running on a an E250), and UBR900's as cable modems...the RF network
seems fine, and the cabling is cool.
The problem is that the cable modems are stuck between init(d) and offline
states...looks they can communicate with the UBR7200 fine through the
cable interface, but they cant seem to get to the DHCP server (CNR) on
another network (the cable-helper address seems to be setup fine though),
the DISCOVER packets cant seem to traverse over, the UBR sees them, but
cant forward them...the DHCP server and UBR are on the same switch, I
think we've narrowed it down to a routing issue, but I can ping the DHCP
server from with a source address of the cable interface's primary address
(but not the secondary)
Here's the running config less passwords and a show ip route command
which looks kinda weird:
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
!
hostname cmts1
!
!
no cable qos permission create
no cable qos permission update
cable qos permission modems
!
!
!
!
!
ip subnet-zero
no ip routing
!
!
!
interface FastEthernet0/0
ip address 192.168.121.150 255.255.255.0
no ip directed-broadcast
no ip route-cache
no ip mroute-cache
full-duplex
!
interface Cable2/0
ip address 172.22.145.1 255.255.255.0 secondary
ip address 172.22.144.1 255.255.255.0
no ip directed-broadcast
no ip route-cache
no ip mroute-cache
no keepalive
cable dhcp-giaddr policy
cable downstream annex B
cable downstream modulation 64qam
cable downstream interleave-depth 32
cable downstream frequency 537000000
cable upstream 0 frequency 28000000
cable upstream 0 power-level 0
cable upstream 0 channel-width 3200000
cable upstream 0 minislot-size 4
no cable upstream 0 shutdown
!
ip default-gateway 192.168.121.254
ip classless
!
snmp-server engineID local 0000000902000004C1A7CC00
snmp-server community public RO
!
!
line con 0
transport input none
line aux 0
!
end
show ip route command:
cmts1#show ip route
Default gateway is 192.168.121.254
Host Gateway Last Use Total Uses Interface
ICMP redirect cache is empty
cmts1#
Thanks again for any and all suggestions!!!
Jon
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12340&t=12340
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]