Hi all
We have Frame-relay network using EIGRP as a routing protocol.
There are two main head quarters; one in San Jose and one in New York. All
the branch offices ( spokes) has redundancy lines; one pointing to San Jose
router and the other one pointing New York router.
I want spokes at the western region to use San Jose router as a primary
router and New York router as a back up circuit to get to internet. Also I
want other spokes at eastern region to use New York router as a primary
router and San Jose router as a back up router.
What should I put in config on spoke routers to implement this performance?
For the reference, here is a part of config on one of spoke routers that is
performing redundancy properly.
interface Serial0/0.1 point-to-point
description PVC to San Jose
ip address 172.16.249.42 255.255.255.252
bandwidth 1544
frame-relay interface-dlci 115
!
interface Serial0/0.2 point-to-point
description PVC to New York
ip address 172.16.249.46 255.255.255.252
bandwidth 1544
frame-relay interface-dlci 312
!
interface FastEthernet1/0
no ip address
shutdown
!
router eigrp 1
network 10.0.0.0
network 131.119.0.0
network 172.16.0.0
network 192.187.128.0
network 198.211.28.0
network 205.227.143.0
network 206.214.16.0
!
ip classless
ip route 0.0.0.0 0.0.0.0 172.16.249.41
ip route 198.211.28.64 255.255.255.192 198.211.28.123
ip route 205.227.132.208 255.255.255.240 161.69.241.209
Thanks
JP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12580&t=12580
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
