Hi all,
these contarary messages from to commands ahve me stumped once it says
that layer 1 is working and then it says that it isnt. Could anybody
tell me what the problem is???
Omer
2503#sh isdn stat
The current ISDN Switchtype = basic-ni1
ISDN BRI0 interface
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 76, State = MULTIPLE_FRAME_ESTABLISHED
TEI = 77, State = MULTIPLE_FRAME_ESTABLISHED
Spid Status:
TEI 76, ces = 1, state = 5(init)
spid1 configured, spid1 sent, spid1 valid
Endpoint ID Info: epsf = 0, usid = 1, tid = 1
TEI 77, ces = 2, state = 5(init)
spid2 configured, spid2 sent, spid2 valid
Endpoint ID Info: epsf = 0, usid = 3, tid = 1
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 0 CCBs = 1
CCB: callid=0x0, sapi=0, ces=1, B-chan=0
Total Allocated ISDN CCBs = 1
2504#ping 172.16.71.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.71.1, timeout is 2 seconds:
ISDN BR0: TX -> SETUP pd = 8 callref = 0x05
Bearer Capability i = 0x8890
Channel ID i = 0x83
Keypad Facility i = '8358661'
ISDN BR0: RX <- RELEASE_COMP pd = 8 callref = 0x85
Cause i = 0x82A2 - No channel available
ISDN BR0: Setup was rejected, cause = 22.....
Success rate is 0 percent (0/5)
BRI unit 0
D Chan Info:
Layer 1 is DEACTIVATED
idb 0xBB2F0, ds 0xCB6E8, reset_mask 0x8
buffer size 1524
RX ring with 2 entries at 0x2101600 : Rxhead 1
00 pak=0x108E34 ds=0x407EDC4 status=D000 pak_size=0
01 pak=0x0CBA78 ds=0x403E1C0 status=F000 pak_size=0
TX ring with 1 entries at 0x2101640: tx_count = 0, tx_head = 0, tx_tail
= 0
00 pak=0x000000 ds=0x000000 status=00 pak_size=0
0 missed datagrams, 0 overruns, 0 bad frame addresses
0 bad datagram encapsulations, 0 memory errors
0 transmitter underruns
0 d channel collisions
B1 Chan Info:
Layer 1 is DEACTIVATED
idb 0xC0628, ds 0xCB7C0, reset_mask 0x0
buffer size 1524
RX ring with 8 entries at 0x2101400 : Rxhead 0
00 pak=0x0CC87C ds=0x40410C8 status=D000 pak_size=0
01 pak=0x0CC6AC ds=0x4040A10 status=D000 pak_size=0
02 pak=0x0CC4DC ds=0x4040358 status=D000 pak_size=0
03 pak=0x0CC30C ds=0x403FCA0 status=D000 pak_size=0
X ring with 4 entries at 0x2101440: tx_count = 0, tx_head = 0, tx_tail =
0
00 pak=0x000000 ds=0x000000 status=5C00 pak_size=0
01 pak=0x000000 ds=0x000000 status=5C00 pak_size=0
02 pak=0x000000 ds=0x000000 status=5C00 pak_size=0
03 pak=0x000000 ds=0x000000 status=7C00 pak_size=0
0 missed datagrams, 0 overruns, 0 bad frame addresses
0 bad datagram encapsulations, 0 memory errors
0 transmitter underruns
0 d channel collisions
B2 Chan Info:
Layer 1 is DEACTIVATED
idb 0xC5960, ds 0xCB890, reset_mask 0x2
buffer size 1524
RX ring with 8 entries at 0x2101500 : Rxhead 0
00 pak=0x0CE6D0 ds=0x4047C48 status=D000 pak_size=0
01 pak=0x0CE500 ds=0x4047590 status=D000 pak_size=0
02 pak=0x0CE330 ds=0x4046ED8 status=D000 pak_size=0
03 pak=0x0CE160 ds=0x4046820 status=D000 pak_size=0
04 pak=0x108524 ds=0x407CC2C status=D000 pak_size=0
05 pak=0x108354 ds=0x407C574 status=D000 pak_size=0
06 pak=0x108184 ds=0x407BEBC status=D000 pak_size=0
07 pak=0x107FB4 ds=0x407B804 status=F000 pak_size=0
TX ring with 4 entries at 0x2101540: tx_count = 0, tx_head = 0, tx_tail
= 0
00 pak=0x000000 ds=0x000000 status=5C00 pak_size=0
01 pak=0x000000 ds=0x000000 status=5C00 pak_size=0
02 pak=0x000000 ds=0x000000 status=5C00 pak_size=0
03 pak=0x000000 ds=0x000000 status=7C00 pak_size=0
0 missed datagrams, 0 overruns, 0 bad frame addresses
0 bad datagram encapsulations, 0 memory errors
0 transmitter underruns
0 d channel collisions
2504#ping 172.16.71.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.71.1, timeout is 2 seconds:
ISDN BR0: Outgoing call id = 0x8007
ISDN BR0: Event: Call to 8358661 at 64 Kb/s
ISDN BR0: Activating..
%ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0, TEI 73 changed to down
ISDN BR0: received HOST_DISCONNECT_ACK
ISDN BR0: Error: Unexpected Disconnect_Ack - callid 8007..
ISDN BR0: Physical layer is IF_DOWN
ISDN BR0: Shutting down ME
ISDN BR0: Shutting down ISDN Layer 3.
Success rate is 0 percent (0/5)
2504#ping 172.16.71.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.71.1, timeout is 2 seconds:
BRI0: Dialing cause ip (s=172.16.71.2, d=172.16.71.1)
BRI0: Attempting to dial 8358661
ISDN BR0: Outgoing call id = 0x8008
ISDN BR0: Event: Call to 8358661 at 64 Kb/s
ISDN BR0: Activating..
%ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0, TEI 73 changed to down
ISDN BR0: received HOST_DISCONNECT_ACK
ISDN BR0: Error: Unexpected Disconnect_Ack - callid 8008..
BRI0: wait for carrier timeout, call id=0x8008
ISDN BR0: Physical layer is IF_DOWN
ISDN BR0: Shutting down ME
ISDN BR0: Shutting down ISDN Layer 3.
Success rate is 0 percent (0/5
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12599&t=12599
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
