u r too much wrong
hostname Cisco2620
!
enable password f
!
no ip name-server
!
isdn switch-type basic-net3
!
ip subnet-zero
no ip domain-lookup
ip routing
!
interface Dialer 1
description connected to Internet
ip address negotiated
ip nat outside
no ip split-horizon
encapsulation ppp
dialer in-band
dialer idle-timeout 120
dialer string 8008000
dialer hold-queue 10
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname a
ppp chap password a
ppp pap sent-username a password a
no ppp multilink
no cdp enable
!
interface FastEthernet 0/0
no description
no ip address
ip nat inside
shutdown
!
interface BRI 0/0
no shutdown
description connected to Internet
no ip address
ip nat outside
dialer rotary-group 1
!
! Access Control List 1
!
no access-list 1
access-list 1 deny any
!
! Dialer Control List 1
!
no dialer-list 1
dialer-list 1 protocol ip permit
!
! Dynamic NAT
!
ip nat translation timeout 86400
ip nat translation tcp-timeout 86400
ip nat translation udp-timeout 300
ip nat translation dns-timeout 60
ip nat translation finrst-timeout 60
ip nat inside source list 1 interface Dialer 1 overload
!
router rip
version 2
passive-interface Dialer 1
no auto-summary
!
!
ip classless
!
! IP Static Routes
ip route 0.0.0.0 0.0.0.0 Dialer 1
Hi ,
I am facing an error in configuring the ISDN on my Cisco 2620 with the
BRI S/T interface card , it keeps on getting disconnected after it dials ,
can anyone guide me what mistake I could be making ?
cisco2620#sh run
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname cisco2620
!
!
username mcse password 0 mcse
!
!
!
!
ip subnet-zero
no ip domain-lookup
!
isdn switch-type basic-net3
isdn voice-call-failure 0
!
!
!
interface FastEthernet0/0
ip address 200.100.10.1 255.255.255.0
no ip directed-broadcast
ip nat inside
duplex auto
speed auto
no dialer?????
!
interface Serial0/0
ip address 10.100.10.1 255.0.0.0
no ip directed-broadcast
clockrate 64000
!
no ip thing
interface BRI0/0
no ip address
no ip directed-broadcast
ip nat outside
encapsulation ppp
dialer string 172324
dialer-group 2
isdn switch-type basic-ni
isdn spid1 0
isdn spid2 0
isdn calling-number 172324
ppp authentication chap
!
ip nat inside source list 1 interface BRI0/0 overload
ip classless
no ip http server
!
access-list 1(2) not 1 anyway there is no use permit any
dialer-list 2 protocol ip list 2
!
line con 0
transport input none
line aux 0
line vty 0 4
login
!
end
cisco2620#
The error message that I am recieving is as follows :
cisco2620#
07:14:36: ISDN BR0/0: Outgoing call id = 0x800C, dsl 0
07:14:36: ISDN BR0/0: Event: Call to 172324 at 64 Kb/s
07:14:36: ISDN BR0/0: process_bri_call(): call id 0x800C, called_number
172324, speed 64, call type DATA
07:14:154618822656: CC_CHAN_GetIdleChanbri: dsl 0
07:14:154618822656: Found idle channel B1
07:14:154618822656: ISDN BR0/0: received HOST_INFORMATION call_id 0x800C
07:14:184683593728: ISDN Event: dsl 0 call_id 0x800C B channel assigned by
switch 0
ISDN BR0/0: received HOST_PROCEEDING call_id 0x800C
07:14:184683593728: B-channel assigned in previous message call id = 0x800C
07:14:186844205132: ISDN BR0/0: received HOST_ALERTING call_id 0x800C
07:14:184683593728: ISDN BR0/0: DEV_CALL_PROGRESSING: modem 3A bchan 0,
call_id 800C, cause 0
07:14:184683593728: ISDN BR0/0: HOST_PROGRESS: VOICE ERROR 3A: bchan 0, call
id 800C
07:14:186844205132: ISDN BR0/0: received HOST_CONNECT call_id 0x800C
07:14:184683593775: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up
07:14:184683593792: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to
172324
07:14:186844205036: ISDN BR0/0: Event: Connected to 172324 on B1 at 64 Kb/s
07:14:186844205132: ISDN BR0/0: received HOST_INFORMATION call_id 0x800C
07:14:197568495616: ISDN BR0/0: received HOST_DISCONNECT call_id 0x800C
07:14:197568495616: ISDN BR0/0: Event: Call to was hung up.
07:14:199729106892: ISDN BR0/0: process_disc_ack(): call id 0x800C, ces 1,
call type DATA
07:14:197568495663: %ISDN-6-DISCONNECT: Interface BRI0/0:1 disconnected
from 172324 , call lasted 3 seconds
07:14:199729106700: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to
down
07:14:206158430207: CC: dsl 0 No CCB Src->L3 cid 0x800C, ev 0x99 ces 1
07:14:244813135872: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0/0, TEI 80
changed to down
07:14:244813135872: In L3_StopT309 for dsl 0.
07:14:246973706992: ISDN BR0/0: Incoming call id = 0x3, dsl 0
07:14:246971349881: ISDN BR0/0: received HOST_DISCONNECT_ACK call_id 0x0
07:14:246973747196: ISDN BR0/0: HOST_DISCONNECT_ACK: call type is INTERNAL
07:14:244813135872: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/0, TEI 80
changed to up
07:14:249108103167: Null Spid: 0
07:14:246971359084: In L3_StopT309 for dsl 0.
cisco2620#
cisco2620#
cisco2620#
My interface configurations are as follows :
cisco2620#sh int bri0/0
BRI0/0 is up, line protocol is up (spoofing)
Hardware is PQUICC BRI
MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, loopback not set
Last input 00:00:03, output never, output hang never
Last clearing of "show interface" counters 01:08:36
Input queue: 0/75/0 (size/max/drops); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/1/16 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
352 packets input, 1622 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
352 packets output, 1524 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 output buffer failures, 0 output buffers swapped out
3 carrier transitions
cisco2620#sh int bri0/0 sdn stat
Global ISDN Switchtype = basic-net3
ISDN BRI0/0 interface
dsl 0, interface ISDN Switchtype = basic-ni
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 80, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
I_Queue_Len 0, UI_Queue_Len 0
TEI 80, ces = 1, state = 8(established)
spid1 configured, no LDN, spid1 NOT sent, spid1 NOT valid
TEI Not Assigned, ces = 2, state = 1(terminal down)
spid2 configured, no LDN, spid2 NOT sent, spid2 NOT valid
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 0 CCBs = 1
CCB:callid=0, sapi=0, ces=1, B-chan=0, calltype=INTERNAL
The Free Channel Mask: 0x80000003
--More-- Total Allocated ISDN CCBs = 1
cisco2620#
cisco2620#sh int nt br
FastEthernet0/0 is up, line protocol is up
Hardware is AmdFE, address is 0004.c1b4.2f40 (bia 0004.c1b4.2f40)
Internet address is 200.100.10.1/24
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Half-duplex, 10Mb/s, 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:07, output 00:00:09, output hang never
Last clearing of "show interface" counters 01:17:54
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
124 packets input, 17629 bytes
Received 124 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast
0 input packets with dribble condition detected
554 packets output, 58353 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
--
Navin Parwal
MCSE ,CIW
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12619&t=12611
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]