If you mean connecting 2 t1 wic's or 2 t1 csu/dsu's, Use a Cat5 cable wired
as follows
Pin 1 Connected to Pin 4
Pin 2 Connected to Pin 5
This will "crossover" the TX and RX pairs and make a t1 crossover cable.
If anybody doesn't have the stuff to make these, I'll make and ship one in
the US for $5.
If you want to connect 2 serial interfaces, then you need a DTE-DCE cable.
These are available from www.pacificcable.com.
-ejay
-----Original Message-----
From: Chris Headings [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 12:05 PM
To: [EMAIL PROTECTED]
Subject: WIC to WIC Connection [7:12668]
Hello all....setting up a small lab w/2 2621's. Would like to create a
"WAN" cable to be able to bring up a serial connection between routers. Is
it possible and if so, what is the pin-out's to custom create it....
Thx
Chris
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12687&t=12668
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
