Sounds like the NM is not compatible
Excerpt From Cisco
http://www.cisco.com/univercd/cc/td/doc/pcat/sewn__y2.htm
Hardware Specifications
The WIC-2T and WIC-A/S are supported on the Cisco 3600 (on the NM-1FE2W,
NM-2FE-2W, NM-2W, and the NM-1FE1R2W network modules), 2600 and 1720 series.
-----Original Message-----
From: No Data [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 2:47 PM
To: [EMAIL PROTECTED]
Subject: still problems with wic-2a/s on a 3640 [7:12726]
Is there a specific network module that a wic-2a/s
needs to go into to be recognized on a 3640. Ive
tried every version IOS that says it work, verified
the operation of the wic-2a/s in a 1720, and verified
my network module with a wic-1t. The network module
that I have is a an NM-1E2W. Do I need a different
module for the wic-2a/s
Ben
PS, debugging assembly takes way longer than debugging C.
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/
Privileged/Confidential Information may be contained in this message or
attachments hereto. Please advise immediately if you or your employer do
not consent to Internet email for messages of this kind. Opinions,
conclusions and other information in this message that do not relate to the
official business of this company shall be understood as neither given nor
endorsed by it.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12729&t=12726
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]