How many B channels are you using on the interface, 2B + 1D for a ISDN BRI
are you already using the 2 B's at 128K or a single B at 64K. Sounds like
the former thus no more B channels!
Karl
----- Original Message -----
From:
To:
Sent: Wednesday, July 18, 2001 11:16 AM
Subject: Re:What is no Free B-channels [7:12775]
> Hi everybody, I have 2 routers connected using ISDN line.Router A dials
out
> to Router B in multilink mode wherein the 2nd call gets generated when the
> traffic reaches 40%
> dialer load-threshold 100 outbound
> Using command sh isdn active ,I can see 2 calls generated on 2 B- channels
> but at the same time I am getting messages like this continiously when I
> am putting terminal monitor on.
>
>
> 0:36:10: ISDN BRI1/0: isdn_is_bchannel_available: No Free B-channels
> 0:36:12: ISDN BRI1/0: isdn_is_bchannel_available: No Free B-channels
> 0:36:14: ISDN BRI1/0: isdn_is_bchannel_available: No Free B-channels
> 0:36:16: ISDN BRI1/0: isdn_is_bchannel_available: No Free B-channels
>
>
>
> Can anyboby explain what this message indicates?
> Also somestime the calls are not initiated on router A end ,what could be
> the reason ?
>
>
> Regards
> Bware
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12777&t=12775
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
