RTT_DBN_NEW#sho queueing priority
Current priority queue configuration:
List Queue Args
1 high protocol ip list 105
1 high protocol ip tcp port telnet
1 high protocol ip tcp port ftp
1 high protocol ip list 120
RTT_DBN_NEW#sho access
RTT_DBN_NEW#sho access-l
RTT_DBN_NEW#sho access-lists 105
Extended IP access list 105
permit ip host 10.99.255.94 10.99.255.0 0.0.0.255 (3166954 matches)
permit ip 10.99.99.0 0.0.0.255 any (178932 matches)
permit ip 10.99.69.32 0.0.0.16 any (3 matches)
deny ip any any (143428867 matches)
RTT_DBN_NEW#sho access-lists 120
Extended IP access list 120
permit ip 10.99.69.0 0.0.0.32 10.99.99.0 0.0.0.255
permit ip 10.99.99.0 0.0.0.255 10.99.69.0 0.0.0.32
deny ip any any (10589149 matches)
RTT_DBN_NEW#
-----Original Message-----
From: Charles Manafa [mailto:[EMAIL PROTECTED]]
Sent: 18 July 2001 14:14
To: 'Andrew Larkins'; [EMAIL PROTECTED]
Subject: RE: WAN link funnies - UP UP but no comms- on same subnet!!!
[7:1 2785]
Can you post your priority list config
> -----Original Message-----
> From: Andrew Larkins [mailto:[EMAIL PROTECTED]]
> Sent: 18 July 2001 13:01
> To: [EMAIL PROTECTED]
> Subject: RE: WAN link funnies - UP UP but no comms- on same subnet!!!
> [7:12785]
>
>
> The interface resets are from when we moved the config to
> other ports to
> rule out physical issues
>
> First side
> Serial3/0 is up, line protocol is up
> Hardware is CD2430 in sync mode
> Description: xxxxxxxx
> Internet address is 10.99.253.17/30
> MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec, rely 255/255,
> load 1/255
> Encapsulation HDLC, loopback not set, keepalive set (10 sec)
> Last input 00:00:00, output 00:00:00, output hang never
> Last clearing of "show interface" counters never
> Input queue: 0/75/0 (size/max/drops); Total output drops: 0
> Queueing strategy: priority-list 1
> Output queue (queue priority: size/max/drops):
> high: 0/20/0, medium: 0/40/0, normal: 0/60/0, low: 0/80/0
> 5 minute input rate 25000 bits/sec, 60 packets/sec
> 5 minute output rate 0 bits/sec, 0 packets/sec
> 1073220 packets input, 61641174 bytes, 0 no buffer
> Received 1911 broadcasts, 0 runts, 0 giants, 0 throttles
> 2 input errors, 0 CRC, 0 frame, 2 overrun, 0 ignored, 0 abort
> 9220 packets output, 906798 bytes, 0 underruns
> 0 output errors, 0 collisions, 4 interface resets
> 0 output buffer failures, 0 output buffers swapped out
> 0 carrier transitions
> DCD=up DSR=up DTR=up RTS=up CTS=up
>
> Remote side:
> Serial1/0 is up, line protocol is up
> Hardware is CD2430 in sync mode
> Description: xxxxxxx
> Internet address is 10.99.253.18/30
> MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec, rely 255/255,
> load 1/255
> Encapsulation HDLC, loopback not set, keepalive set (10 sec)
> Last input 00:00:02, output 00:00:02, output hang never
> Last clearing of "show interface" counters 00:00:02
> Input queue: 0/75/0 (size/max/drops); Total output drops: 0
> Queueing strategy: priority-list 1
> Output queue (queue priority: size/max/drops):
> high: 0/20/0, medium: 0/40/0, normal: 0/60/0, low: 0/80/0
> 5 minute input rate 0 bits/sec, 0 packets/sec
> 5 minute output rate 0 bits/sec, 0 packets/sec
> 1 packets input, 56 bytes, 0 no buffer
> Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
> 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
> 1 packets output, 56 bytes, 0 underruns
> 0 output errors, 0 collisions, 0 interface resets
> 0 output buffer failures, 0 output buffers swapped out
> 0 carrier transitions
> DCD=up DSR=up DTR=up RTS=up CTS=up
>
> -----Original Message-----
> From: Farhan Ahmed [mailto:[EMAIL PROTECTED]]
> Sent: 18 July 2001 13:24
> To: 'Andrew Larkins'
> Subject: RE: WAN link funnies - UP UP but no comms- on same subnet!!!
> [7:1 2780]
>
>
> send me the sh int
>
> -----Original Message-----
> From: Andrew Larkins [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, July 18, 2001 3:17 PM
> To: [EMAIL PROTECTED]
> Subject: RE: WAN link funnies - UP UP but no comms- on same subnet!!!
> [7:12780]
>
>
> the very weird thing here is at RTS DTS etc are all up....
> both devices are
> on a /30 subnet no problems here. I do not need any routing
> because these
> are directly connected networks. NO crc errors on link flap/ interface
> resets!!
>
> Very confused
>
> -----Original Message-----
> From: Phil Barker [mailto:[EMAIL PROTECTED]]
> Sent: 18 July 2001 12:45
> To: [EMAIL PROTECTED]
> Subject: Re: WAN link funnies - UP UP but no comms- on same subnet!!!
> [7:12778]
>
>
> Andrew,
> From what you say your remote end is working fine
> both in Tx and Rx and your Tx is working fine since
> remote end sees your cdp. Your Rx appears to be the
> problem. Have you tried swapping out your local Serial
> cable ? What about 'sh int serial xxx' to check your
> pins ? DCD RTS etc.
>
> regards,
>
> Phil.
> --- Andrew Larkins
> wrote: > HI all,
> >
> > Strange problem here.
> >
> > The serial interface are UP UP on both sides, but we
> > are not able to ping
> > each other - even though directly connected. A
> > "debug ip ICMP" on the
> > remote site shows the ping coming through and
> > replying, but the reply never
> > gets back.
> > Also the remote site saw my router using CDP, but I
> > do not see him.
> >
> > Any ideas??
> >
> > I believe this is Telco related, but the line shows
> > clean from the interface
> > stats
> >
> > Andrew
> [EMAIL PROTECTED]
>
> ____________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk
> or your free @yahoo.ie address at http://mail.yahoo.ie
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12796&t=12796
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
