I have a weird one....we have a client that is connected to us via
ethernet. We have a 7513 on our side and they have a 2621. They are
receving a LOT of arp input, so much in fact that their router is maxed out
at 100%. The sh proc cpu shows arp input as the culprit....
When you do a sh arp, they only entry that should be in their 2621 is our
7513 with the proper IP and MAC combo....but instead the arp table (in the
clients 2621) goes on forever and shows random IP's associated with the MAC
of our 7513 FA....
Any help would be greatly appreciated.....
Thx
Chris
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13003&t=13003
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
