Hi
which IOS ver ur using because in older ones u can use
show system and it will show something like this
PS1-Status PS2-Status Fan-Status Temp-Alarm Sys-Status Uptime d,h:m:s Logout
---------- ---------- ---------- ---------- ---------- -------------- ------
---
ok ok ok off ok 20,13:51:18 20 min
PS1-Type PS2-Type Modem Baud Traffic Peak Peak-Time
---------- ---------- ------- ----- ------- ---- -------------------------
disable 9600 0% 4% Fri Jul 6
2001, 16:38:45
System Name System Location System Contact
------------------------ ------------------------ ------------------------
Switch A
Regards
""Farhan Ahmed"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> current traffic rate
>
> -----Original Message-----
> From: Phil Barker [mailto:[EMAIL PROTECTED]]
> Sent: Monday, July 23, 2001 1:28 PM
> To: [EMAIL PROTECTED]
> Subject: sh system command ? [7:13330]
>
>
> Hi,
> The 'show system' command on a Cat 5500 contains a
> current traffic level and a peak level. How long are
> these values valid for. e.g is the current traffic
> value over a five minute period ?
> Is the peak value from when the Supy is booted up
> ?
>
> PS : checked cisco.com but cannot find an answer.
>
> Regards,
>
> Phil.
>
> ____________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk
> or your free @yahoo.ie address at http://mail.yahoo.ie
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13341&t=13330
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
