If you cable works with the other switches, you can try to change the flow
control to NONE instead of HARDWARE. Most of the Cisco devices I have worked
with will accept HARDWARE flow control, but some few will not.
If that does not work, I would suggest that you connect the new switch with
one of the other switches with a CAT5 cable (crossed over) and then connect
the the other switch and do a show cdp nei, and then telnet into it from the
switch you're connected to.
Hth,
Ole
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://www.RouterChief.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NEED A JOB ???
http://www.oledrews.com/job
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: Sim, CT (Chee Tong) [mailto:[EMAIL PROTECTED]]
Sent: Sunday, July 22, 2001 10:04 PM
To: [EMAIL PROTECTED]
Subject: weird switch! can't config thru console [7:13302]
Hi.
I tried to config a 2900 switches thru its console but it has no output at
all on the hyperterminal screen. I am sure my setting is correct. (9600-N-1
none) as I can get output on other switches with the same setting. May I
know what is wrong with the switch? Any method to solve this
Tong
==================================================================
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
de afzender direct te informeren door het bericht te retourneren.
==================================================================
The information contained in this message may be confidential
and is intended to be exclusively for the addressee. Should you
receive this message unintentionally, please do not use the contents
herein and notify the sender immediately by return e-mail.
==================================================================
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13353&t=13302
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
