Cisco routers default to update every 'so often' where as the 3com routers
update when a change has been made...this is why the cisco routers drop all
updates after so long because the 3com router is no longer sending them. On
the cisco side you can change the update interval to match and all should be
well.
-Patrick
>>> "Provost, Robert" 07/26/01 04:34PM >>>
> We have a Frame Relay network with 3Com and Cisco routers. The core
> routers are 3Com PathBuilders S500 series. All routers are configured
> for RIP version 2 (VLSM). All of the 3Com router's RIP routes show up
> fine in the Pathbuilder's RIP table. The Cisco router's RIP routes
> show up, then "garbage out"(show as unreachable), then show up again,
> then "garbage out" , etc. Our current work around is to add static
> routes to the Pathbuilders for all Cisco routers.
>
> Does anyone have any info on this issue?
>
> Any help is greatly appreciated.
>
> Thanks,
> Robert Provost
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13904&t=13900
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
