Question for all you IBM printer gurus. I have the following small office
connected to my hospital.
HOSPITAL-AIRONET340----------------OFFICE-AIRONET340---C1924----IBM AFP
Printer.
Here is the problem. After about 15-30 minutes the printer is no longer
visible or pingable from the network. It seems to time out from the switch
connection. If I log into the switch and ping this printer it comes back up
and is then visible on the network again, until it times out? Any known
conflicts with the C1900's or the Aironets and this particular printer?
Anyone know of any timeout parameter changes that might take care of this?
There isn't a whole lot of commands on the 1900 to use.
Bob Sites
System Engineer
Valley Health System, IS Dept.
[EMAIL PROTECTED]
Confidentiality Notice:
This e-mail message, including any attachments, is for the sole use of the
intended recipients and may contain confidential and privileged information.
Any unauthorized review, use, disclosure or distribution is prohibited. If
you are not the intended recipient, please contact the sender by reply
e-mail and destroy all copies of the original message.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13992&t=13992
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
