First one would be how to access the console of the switch. Is that a serial
connection or is there a IP address that you can telnet into like a private
192.168.x.x address.
Second do you know where I could get some documentation on these switches,
not sales stuff, but how to configure. Something like cisco command and
config references.
Third can either one of these cards be connected back-to-back without a
switch.
----- Original Message -----
From: "Spencer Plantier"
To: "Donald B Johnson jr" ;
Sent: Monday, July 30, 2001 9:52 AM
Subject: Re: experience with pa-a1-oc3mm or the pa-a3-t3 cards [7:14196]
> Sure whats up?
> --- Donald B Johnson jr
> wrote:
> > Does anybody have any experience with pa-a1-oc3mm or
> > the pa-a3-t3 cards and
> > marconi/fore switches. If you do Please contact me I
> > have a few questions.
> > Thank You,
> >
> > Donald
> [EMAIL PROTECTED]
>
>
> =====
> Spencer Plantier
> Internet Solutions Engineer
> Voice 919-949-9993
> Cell 919-696-8848
>
> __________________________________________________
> Do You Yahoo!?
> Make international calls for as low as $.04/minute with Yahoo! Messenger
> http://phonecard.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=14215&t=14196
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
