First you need to know the line number of the AUX port on your device.
You can find this by looking at the output from the "show line" command. On
a 2501 the AUX port is line number 1.
Next add 2000 to this linenumber, e.g 2001 for the C2501.
Now all you need to do is to add a host statement that points to an IP
address of your local device and point to the portnumber you just calculated.
For example: ip host AUX 10.1.1.1 2001
Now you should be able to access the attached console port just by typing
AUX on your local router.
To disconnect press Ctrl-Shift-6 x and type disconnect.
The cable should be a fully twisted "cisco" cable.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=14348&t=14317
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
