Let me explain...
1) the methodoly used is a subset of NBAR called "class based marking
feature", which is available in ver 12.1(5)T or higher...
2) you must enable cef before you configure NBAR
go to the following link for more info
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121
limit/121e/121e2/nbar2e.htm
Santosh Koshy
""william gannon"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> How would you block code red with CEF and NBAR?
>
> On Sun, 5 Aug 2001 19:28:10 -0400, Santosh Koshy wrote:
>
> > Depends on your edge router........ you need a router that supports CEF
&
> > NBAR (3600, 7000, e.t.c.) with IOS 12.1(5) T or higher
> >
> > Thanks,
> > Santosh
> >
> > ""Russ Kreigh"" wrote in message
> > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> _______________________________________________________
> Send a cool gift with your E-Card
> http://www.bluemountain.com/giftcenter/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=14978&t=14967
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
