which one is the ans?? and why pls help
An Ethernet media trunk link is configured and is
operating between two Cisco switches. Each switch has
identical modules, software revisions and VLAN
configuration information. Spanning tree protocol is
disabled on all VLANs. Problems have been identified
regarding frames leaking between two VLANs. What is
the most likely cause of this problem?
a. The duplex mode is different at each switch.
b. The link is using IEEE 802.1Q protocol in point to
point mode.
c. The link is using 802.10 trunk protocol, with the
SAID parameters incorrectly set.
d. The link is using ISL protocol and the native VLAN
information is different at each end of the link.
e. The link is using IEEEE 802.1Q protocol and the
native VLAN information is different at the each end
of the link
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15234&t=15234
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
