I agree, unless it's doing this over and over and over and over again,
it's perfectly normal. Or, if you see an entire card drop and come back
- then you have a problem.
You'll usually see other errors in 'show mac' if there is a duplex
problem. Clear that ports stats and take a look at show mac. If errors
are a ris'n, then look into problems.
Mike
Murphy, Brian J SITI-ISET-31 wrote:
> Patrick,
> This just means that the port lost a connection to the end device, it's
> possible that its cause by a pc being rebooted, unlikely a duplex mismatch,
> or config, could be NIC or cable.
> Best thing is to set it to auto and see what happens, remember if you have
> one side auto and the other hard coded then the auto will ALWAYS be
> half-duplex.....
>
> Brian
>
> -----Original Message-----
> From: Patrick Donlon [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, August 08, 2001 1:33 PM
> To: [EMAIL PROTECTED]
> Subject: Cat 6.5K error messages [7:15241]
>
> I have a cat' that is giving me these messages on the console:
>
> 06:02:18 MET +02:00 %PAGP-5-PORTFROMSTP:Port 8/48 left bridge port 8/48
>
> 06:02:35 MET +02:00 %PAGP-5-PORTTOSTP:Port 8/48 joined bridge port 8/48.
>
> From the CCO I've read that it could be a duplex mis-match, faulty NIC,
> cable or mis-configuration.
> How can I find out from the switch stat's which is most likely?
>
> cheers Pat
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15361&t=15241
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]