The standard hyper terminal has a problem with that - you can find and
download a better one from the Internet.
Hth,
Ole
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
http://www.RouterChief.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NEED A JOB ???
http://www.oledrews.com/job
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: Andy Barkl [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 08, 2001 10:07 PM
To: [EMAIL PROTECTED]
Subject: Cisco 675 password recovery [7:15422]
I found a document that describes how to access the Rmon mode of the Cisco
675 during bootup with CTRL C but the device wont respond to my request for
password recovery.
The document states that during power on when the Hello! line is displayed,
the break sequence will work.
This particular 675 is running CBOS 2.2.0 so it *should* work.
Has anyone had any success in this scenario?
P.S. Of course this is to repair the Code Red virus problem.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15433&t=15422
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
