I have the same problem. I tell you what I did.
I use comand dir disk0: to see whether there is IOS image.
Then in global config: boot system flash disk0:nameoftheisoimage
write mem
After the reload
If there is no IOS. You have to do tftp to the slot0 by the command:
copy tftp disk0:
It works for me.
Good luck
Hoa Ngo CCNP
>From: "TiuN Hong Leng"
>Reply-To: "TiuN Hong Leng"
>To: [EMAIL PROTECTED]
>Subject: Re: Boot prompt for 7204VXR [7:15442]
>Date: Thu, 9 Aug 2001 05:48:12 -0400
>
>You boot a "boot image" version of the IOS, a subset of IOS.
>
>
>
>On Thu, 9 Aug 2001 03:57:21 -0400
>"Bykov Andrey" wrote:
>
> > Hi, group!
> >
> > I need your suggestions on following question:
> > I've got 7204VXR. And there is a strange prompt in user and
> > privilege modes "Router(boot)>" or "Router(boot)#".
> > Config register - 0x2102. The router has booted from bootflash.
> > Is it normal prompt and how it can be changed?
> >
> > P.S. I thought that I knew almost everything about router's booting
> > process with my experience and CCNP certificate. :)
> >
> >
> > Andrey Bykov, CCNP
>--
>TiuN Hong Leng
>CCNA/CCNP/CCDA/CCDP/CATM Specialist/CVOICE Specialist
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15483&t=15442
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
