try
modem autoconfigure-discovery
or reverse telnet to port
2001 if its line 1 on yr router
u can see by
sh line command
get yr strings from 56k.com
and do it manually
also do
debug confmodem b4 modem autoconfigure-discovery
to c whats happening with modem
----- Original Message -----
From: "No Data"
To:
Sent: Thursday, August 09, 2001 9:06 PM
Subject: Re: dial in to AUX port on 2611 [7:15417]
> try this.
> modemcap edit usrmodem misc &FS0=1&C1&D3&H1&R2&B1
>
> then under the line config
>
> modem autoconfigure type usrmodem
> speed 38400
>
> Make sure dips 3 and 8 are down and the rest up.
>
> hth
> Ben
>
> --- "Mr. Richard L. Pickard"
> wrote:
> > I have a US Robotics Sportster 14,000 modem
> > connected to my 2611 router via
> > the AUX port.
> > The router does not answer the call. I have an
> > enable & enable secret
> > password set.
> > I am certain of the satin crossover cable and all
> > other physical layer
> > issues.
> >
> > Here is my config:
> >
> > line con 0
> > transport input none
> > line aux 0
> > password cisco
> > login
> > modem InOut
> > transport input all
> > speed 115200
> > flowcontrol hardware
> > line vty 0 1
> > password cisco
> > login
> > line vty 2 4
> > login
> >
> >
> > Anybody have any ideas?
> [EMAIL PROTECTED]
>
>
> __________________________________________________
> Do You Yahoo!?
> Make international calls for as low as $.04/minute with Yahoo! Messenger
> http://phonecard.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15496&t=15417
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
