Just so I understand ospf costs/metrics correctly...
For an example....I have a remote WAN router with two PVC's. Both
connections are 56k. One PVC connects to a host circuit @ 1024K and the
other PVC connects to a different host circuit @ 512K. Because these
connections are serial, without a bandwidth or cost statement on the host or
remote interfaces will ospf see both circuits as 1536k links and load
balance? With adding a bandwith statement on each host side, I assume ospf
traffic will perfer the 1024 link? Then what if I add a higher cost (say
above 1785) on the remote circuit that connects back to the 1024k host, will
it then perfer the 512k?
Sorry about all of the questions, I am just somewhat confused.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15567&t=15567
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
