----- Original Message -----
From: Charles Ryan
To:
Sent: Tuesday, August 14, 2001 8:00 AM
Subject: 2524 and 2501 back to back [7:16028]
> Hello group,
>
> Sorry if this has been covered before, I've checked the archives and I
can't
> seem to find anything relevant to my question.
>
> I have a 2524 with a built in FT1/T1 csu-dsu module, and I wish to connect
> it back to back with a 2501 (DB-60 on the serial port).
>
> I'm trying to figure out how I could go about doing it without having to
> attempt to find a 5-in-1 serial module for the 2524. Do I need to get
> another csu/dsu for the 2501 and then connect them together that way (with
> the RJ-45 cable from the 2524 going into the other csu/dsu, then the
> V.35/DB-60 going into the 2501 serial port)?
yes. You'll need a T-1 rollover cable with RJ-45 connectors on both sides
for the CSU/CSU connection that looks like this
1 -- 4
2 -- 5
4 -- 1
5 -- 2
pin orientation is with the RJ-45 tab-side down, connector pointing away
from you, pin 1 on the top left
>
> Sorry for the basic question, if anyone out there has done this, I would
> greatly appreciate hearing from you. Appreciate any and all help with
this,
> links, etc. are also greatly appreciated.
>
> Thanks!
>
> -Chuck
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16056&t=16028
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
