Yes, thought that was the problem too but all is right and since the router
is the thing I know the least about I am assuming the problem lies in my
coding of it.
""Tony Medeiros"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Got a WINS server configured on the host you are testing? You need that
for
> browsing across subnets.
> Tony M.
> #6172
>
> ----- Original Message -----
> From: "Charles Perry"
> To:
> Sent: Tuesday, August 14, 2001 9:45 AM
> Subject: Cisco 3660 Router Config [7:16048]
>
>
> > Im not an expert just a cisco hack with a couple configs under my belt.
I
> > added another subnet to our network and set IP address to ethernet3/1
and
> a
> > couple access list entries. The problem is I can ping across the subnets
> > fine, and can access resources (those not needing domain authorization)
by
> > IP but not by name, so therefore it will also not see the domain or
browse
> > the network. The new subnet also has no problm acessing the intenet via
> the
> > T1 on the router.
> > Any ideas would be nice
> >
> > Configuration in attachment.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > [demime removed a uuencoded section named Document.rtf which was 120
> lines]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16065&t=16048
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
