Ummmm, yea.... You need a DTE DCE back to back serial cable, and make sure to set the clock rate on the DCE side.. This is the most basic way... ----- Original Message ----- From: Hamid To: Sent: Wednesday, August 15, 2001 1:33 PM Subject: Connecting two Routers through their Serial Interfaces [7:16209] > Hi group, > > Can anyone tell me if it's possible if you want to connect two routers > Bach-to Back using their serial interfaces. > > And if possible how should I configure the serial inetrfaces. > > Thanks in advace > > Hamid Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=16215&t=16215 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
