Try to change the flowcontrol from hardware to none on your hyper terminal. Hth, Ole ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ http://www.RouterChief.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ NEED A JOB ??? http://www.oledrews.com/job ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -----Original Message----- From: NKP [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 16, 2001 11:02 AM To: [EMAIL PROTECTED] Subject: Error in console port - Cisco 2610 , no keyboard sensing ?? [7:16299] Hi , I am facing an error in my Cisco 2610 , as soon as I swictch on my router and connect my console port to the serial port of my computer , the flash loads itself perfectly , but the console port is not accepting any commands from the keyboard at all . ALl the interfaces of the router are working perfectly as it shows the interface as coming up . I am not able to break into the console port and some to the rommon mode as well . I have checked the flash and the RAM , they both are working fine , the problem seems to be of the console port not accepting any command from the keyboard , the problem is coming with the hyper terminal of other computers as well on connecting with this router . Please guide me how I may proceed with fixing this issue ?? thanks, Navin Parwal Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=16304&t=16304 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]