I don't think bridge will work on this network because of split horizon.




----- Original Message -----
From: "Brian" 
To: 
Sent: Tuesday, August 21, 2001 7:51 AM
Subject: CHALLENGE PROBLEM (was Re: For FR Grus.... [7:16635]) [7:16659]


> On Tue, 21 Aug 2001, Cisco Lover wrote:
>
> > Hi Guys..
> >
> > Come with some New Queston..
>
> hmm, ok, so your looking for some challenging questions? Ok, I will post
> one, its got FR in it.  First I'll post the problem, followed by the
> config:
>
> THE PROBLEM
> ===========
> Users on DLCI's 200, 224, 201, 225 cannot communicate to eachother.  They
> can talk just fine to the rest of the network, but no packets can pass
> between them.  Later discovery reveals that so long as they are on
> different layer 3 network addressing, communcation can occur, but if they
> are on the same network, such as 192.168.3.0, then they cannot communicate
>
> What is the problem?  I will reply to let everyone know who got the
> correct answer.
>
> Below is the configuration:
>
> !
> version 11.3
> !
> interface Ethernet2/0
>  ip address 192.168.1.242 255.255.255.0
> !
> interface Serial4/0
>  no ip address
>  encapsulation frame-relay IETF
>  keepalive 15
>  frame-relay map bridge 200 broadcast IETF
>  frame-relay map bridge 224 broadcast IETF
>  frame-relay map bridge 201 broadcast IETF
>  frame-relay map bridge 225 broadcast IETF
>  frame-relay lmi-type ansi
>  bridge-group 1
> !
> interface BVI1
>  ip address 192.168.3.242 255.255.255.0 secondary
>  ip address 192.168.2.242 255.255.255.0
>
> !
> router igrp 1
>  network 192.1.0.0
>  network 192.2.0.0
>  network 193.3.0.0
> !
> ip classless
> !
> bridge irb
>  bridge 1 protocol ieee
>  bridge 1 route ip
> !
>
>
> >
> > For eg,
> > our FR switch is setup for Full mesh,But out network is setup as Hub &
> Spoke
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> -----------------------------------------------
>     I'm buying / selling used CISCO gear!!
>             email me for a quote
>
> Brian Feeny, CCIE #8036   Scarlett Parria
> [EMAIL PROTECTED]         [EMAIL PROTECTED]
> 318-213-4709              318-213-4701
>
> Netjam, LLC   http://www.netjam.net
> 333 Texas St.    VISA/MC/AMEX/COD
> Suite 1401   30 day warranty
> Shreveport, LA 71101   Cisco Channel Partner
> toll free: 866-2NETJAM
> phone:    318-212-0245
> fax:    318-212-0246




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16681&t=16681
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to