yeah you got irb and bvi and igrp on same interface you are creating loops because SH is disabled ----- Original Message ----- From: "Brian" To: Sent: Tuesday, August 21, 2001 9:35 AM Subject: Re: CHALLENGE PROBLEM (was Re: For FR Grus.... [7:16635]) [7:16687] > On Tue, 21 Aug 2001, Donald B Johnson jr wrote: > > > I don't think bridge will work on this network because of split horizon. > > Can you be more clear about your answer? > > Brian > > > > > > > > > > > > ----- Original Message ----- > > From: "Brian" > > To: > > Sent: Tuesday, August 21, 2001 7:51 AM > > Subject: CHALLENGE PROBLEM (was Re: For FR Grus.... [7:16635]) [7:16659] > > > > > > > On Tue, 21 Aug 2001, Cisco Lover wrote: > > > > > > > Hi Guys.. > > > > > > > > Come with some New Queston.. > > > > > > hmm, ok, so your looking for some challenging questions? Ok, I will post > > > one, its got FR in it. First I'll post the problem, followed by the > > > config: > > > > > > THE PROBLEM > > > =========== > > > Users on DLCI's 200, 224, 201, 225 cannot communicate to eachother. They > > > can talk just fine to the rest of the network, but no packets can pass > > > between them. Later discovery reveals that so long as they are on > > > different layer 3 network addressing, communcation can occur, but if they > > > are on the same network, such as 192.168.3.0, then they cannot > communicate > > > > > > What is the problem? I will reply to let everyone know who got the > > > correct answer. > > > > > > Below is the configuration: > > > > > > ! > > > version 11.3 > > > ! > > > interface Ethernet2/0 > > > ip address 192.168.1.242 255.255.255.0 > > > ! > > > interface Serial4/0 > > > no ip address > > > encapsulation frame-relay IETF > > > keepalive 15 > > > frame-relay map bridge 200 broadcast IETF > > > frame-relay map bridge 224 broadcast IETF > > > frame-relay map bridge 201 broadcast IETF > > > frame-relay map bridge 225 broadcast IETF > > > frame-relay lmi-type ansi > > > bridge-group 1 > > > ! > > > interface BVI1 > > > ip address 192.168.3.242 255.255.255.0 secondary > > > ip address 192.168.2.242 255.255.255.0 > > > > > > ! > > > router igrp 1 > > > network 192.1.0.0 > > > network 192.2.0.0 > > > network 193.3.0.0 > > > ! > > > ip classless > > > ! > > > bridge irb > > > bridge 1 protocol ieee > > > bridge 1 route ip > > > ! > > > > > > > > > > > > > > For eg, > > > > our FR switch is setup for Full mesh,But out network is setup as Hub & > > > Spoke > > > > FAQ, list archives, and subscription info: > > > http://www.groupstudy.com/list/cisco.html > > > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > > > > > > > > > > ----------------------------------------------- > > > I'm buying / selling used CISCO gear!! > > > email me for a quote > > > > > > Brian Feeny, CCIE #8036 Scarlett Parria > > > [EMAIL PROTECTED] [EMAIL PROTECTED] > > > 318-213-4709 318-213-4701 > > > > > > Netjam, LLC http://www.netjam.net > > > 333 Texas St. VISA/MC/AMEX/COD > > > Suite 1401 30 day warranty > > > Shreveport, LA 71101 Cisco Channel Partner > > > toll free: 866-2NETJAM > > > phone: 318-212-0245 > > > fax: 318-212-0246 > I'm buying / selling used CISCO gear!! > email me for a quote > > Brian Feeny, CCIE #8036 Scarlett Parria > [EMAIL PROTECTED] [EMAIL PROTECTED] > 318-213-4709 318-213-4701 > > Netjam, LLC http://www.netjam.net > 333 Texas St. VISA/MC/AMEX/COD > Suite 1401 30 day warranty > Shreveport, LA 71101 Cisco Channel Partner > toll free: 866-2NETJAM > phone: 318-212-0245 > fax: 318-212-0246 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=16701&t=16701 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]