yes that was a typo, but had nothing to do with the problem, good catch On Tue, 21 Aug 2001, Ole Drews Jensen wrote: > First of all, I believe you have a typo: > > > router igrp 1 > > network 192.1.0.0 > > network 192.2.0.0 > > network 193.3.0.0 > > should have been > > router igrp 1 > network 192.168.1.0 > network 192.168.2.0 > network 193.168.3.0 > > I have not an answer to your question yet. > > Ole > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Ole Drews Jensen > Systems Network Manager > CCNA, MCSE, MCP+I > RWR Enterprises, Inc. > [EMAIL PROTECTED] > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > http://www.RouterChief.com > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > NEED A JOB ??? > http://www.oledrews.com/job > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > -----Original Message----- > From: Brian [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, August 21, 2001 9:51 AM > To: [EMAIL PROTECTED] > Subject: CHALLENGE PROBLEM (was Re: For FR Grus.... [7:16635]) [7:16659] > > > On Tue, 21 Aug 2001, Cisco Lover wrote: > > > Hi Guys.. > > > > Come with some New Queston.. > > hmm, ok, so your looking for some challenging questions? Ok, I will post > one, its got FR in it. First I'll post the problem, followed by the > config: > > THE PROBLEM > =========== > Users on DLCI's 200, 224, 201, 225 cannot communicate to eachother. They > can talk just fine to the rest of the network, but no packets can pass > between them. Later discovery reveals that so long as they are on > different layer 3 network addressing, communcation can occur, but if they > are on the same network, such as 192.168.3.0, then they cannot communicate > > What is the problem? I will reply to let everyone know who got the > correct answer. > > Below is the configuration: > > ! > version 11.3 > ! > interface Ethernet2/0 > ip address 192.168.1.242 255.255.255.0 > ! > interface Serial4/0 > no ip address > encapsulation frame-relay IETF > keepalive 15 > frame-relay map bridge 200 broadcast IETF > frame-relay map bridge 224 broadcast IETF > frame-relay map bridge 201 broadcast IETF > frame-relay map bridge 225 broadcast IETF > frame-relay lmi-type ansi > bridge-group 1 > ! > interface BVI1 > ip address 192.168.3.242 255.255.255.0 secondary > ip address 192.168.2.242 255.255.255.0 > > ! > router igrp 1 > network 192.1.0.0 > network 192.2.0.0 > network 193.3.0.0 > ! > ip classless > ! > bridge irb > bridge 1 protocol ieee > bridge 1 route ip > ! > > > > > > For eg, > > our FR switch is setup for Full mesh,But out network is setup as Hub & > Spoke > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > > ----------------------------------------------- > I'm buying / selling used CISCO gear!! > email me for a quote > > Brian Feeny, CCIE #8036 Scarlett Parria > [EMAIL PROTECTED] [EMAIL PROTECTED] > 318-213-4709 318-213-4701 > > Netjam, LLC http://www.netjam.net > 333 Texas St. VISA/MC/AMEX/COD > Suite 1401 30 day warranty > Shreveport, LA 71101 Cisco Channel Partner > toll free: 866-2NETJAM > phone: 318-212-0245 > fax: 318-212-0246 I'm buying / selling used CISCO gear!! email me for a quote Brian Feeny, CCIE #8036 Scarlett Parria [EMAIL PROTECTED] [EMAIL PROTECTED] 318-213-4709 318-213-4701 Netjam, LLC http://www.netjam.net 333 Texas St. VISA/MC/AMEX/COD Suite 1401 30 day warranty Shreveport, LA 71101 Cisco Channel Partner toll free: 866-2NETJAM phone: 318-212-0245 fax: 318-212-0246 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=16709&t=16709 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]