Will you people get over it already. I have ports and interfaces oozing out
of my ears...:)-
Naim Kazan
Fidelity Investments FISC-T
[EMAIL PROTECTED]
-----Original Message-----
From: Dennis H [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 23, 2001 3:49 PM
To: [EMAIL PROTECTED]
Subject: Re: THEY ARE NOT PORTS THEY ARE INTERFACES! [7:16843]
Sorry to say "official." How bout according to Cisco, Bruce Caslow, etc...
the terminology is ports are contained in layer two devices such as switches
and interfaces are in layer three devices such as in routers.
""Priscilla Oppenheimer"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> There is no "official" terminology. That's the bottom line.
>
> Priscilla
>
> At 11:58 AM 8/23/01, Dennis H wrote:
> >The official terminology is ports are in layer two devices such as
switches
> >and interfaces are in layer three devices such as in routers...
> >
> >
> >
> >""Peter Slow"" wrote in message
> >[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > an INTERFACE a thing, such as an ethernet or loopback interface.
> > > a port is a logical device, and NO a loopback does not count.
> > > i meant like tcp ports, usp ports, and the like.
> > >
> > > Stop being d0rks and copying everyone else who does it
> > > wrong, and dont be afraid to tell people to speak correctly!
> > >
> > > c3660#conf t
> > > Enter configuration commands, one per line. End with CNTL/Z.
> > > c3660(config)#port fastethernet 0/0
> > > ^
> > > % Invalid input detected at '^' marker.
> > >
> > > c3660(config)#interface fastethernet 0/0
> > > c3660(config-if)#^Z
> > > c3660#SEE!?
> > > % Unrecognized command
> > > c3660#SEE!
> > > -humboldt
> ________________________
>
> Priscilla Oppenheimer
> http://www.priscilla.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17048&t=16843
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
